Functional housings
Functional housings integrating mounting details.
3D Printing · Custom parts
3D Printing MJF
of PA12.
Complex geometries, functional parts. We manufacture prototypes and PA12 components via 3D Multi Jet Fusion printing.
Get your quoteQuote in 24 h · Engineering review
- From
- 1 unit
- Delivery from
- 5 working days
- Material
- PA12 3D printing
01 / Why choose this material
Properties and uses
of PA12.
Polyamide for Multi Jet Fusion 3D printing, suitable for functional prototypes and end-use components. Allows complex geometries without dedicated supports.
Polyamide PA12 is printed layer by layer on a powder bed using Multi Jet Fusion. It allows manufacturing ducts, clips, and housings without dedicated supports. The finish is matte and slightly granular; it does not equate to a transparent or polished part.
Learn about the MJF 3D printing process ↗PA12 Properties
Reference · HP 3D HR PA 12
- Indicative density
- 1,01 g/cm³
- Tensile strength · ref.
- 48 MPa
- HDT · 0,45 MPa
- 175 °C
- Surface appearance
- Matte · granular
- Technology
- Multi Jet Fusion
Reference: HP 3D HR PA 12. The 175 °C corresponds to heat deflection temperature (HDT) at 0.45 MPa; at 1.82 MPa it is 95 °C. These are not continuous use temperatures.
Property reference: HP · PA12 ↗
- Tough
- Good wear resistance
- Good resistance to oils and greases
- Matte and slightly granular surface
PA12 Applications
Clips and ducts
Clips and ducts with complex shapes and access points for dust cleaning.
Mounting tools
Mounting tools adapted to a specific operation or product.
Parts with complex geometry
Components whose geometry leverages layer-by-layer printing.
02 / A choice based on usage
Choose PA12
based on your part.
These criteria help define the material, geometry, and working conditions before manufacturing.
01
Functional geometry
For housings, ducts and details that are hard to machine. Cavities must allow the powder to be removed.
02
Prototype or final part
Define loads, fits, and critical orientation to verify if MJF suits the function.
03
Quantity and price
Unit cost typically varies little as quantity increases. A larger run does not imply a significant per-part discount.
The part's function is the starting point.
Indicate loads, temperature, environment, and appearance needed. If the drawing requires a specific grade, include it in the request.
03 / Finishing also counts
Finishes and appearance
of PA12.
Define visible surfaces and the required result for your part. Requested treatments are included in the quote.
Matte and slightly granular surface typical of the process. Orientation and geometry influence the result.
The image could not be loaded. Try a different finish.
Reference images: material, geometry, and surface preparation influence the outcome. Special finishes are quoted upon request.
04 / From design to quote
MJF
PA12 3D printing.
Multi Jet Fusion printing builds the PA12 part layer by layer on a powder bed. Afterward, it cools, the powder is removed, and the specified post-processing is performed. The design must allow for cleaning internal cavities.
Upload a 3D model per part, for example in STEP or STL. SLDPRT, X_T, X_B, IPT, CATPART, PRT, SAT, and 3DM files are also accepted. Add a PDF drawing with functional dimensions and assembly requirements.
Upload your file and request a quotePart tolerances
Printing tolerances depend on geometry, orientation, and material. Indicate assembly dimensions on a drawing for the team to confirm feasibility. CNC machining tolerances are not automatically applied.
Quantity and cost per part
The price per part usually varies little with quantity. Producing more units does not imply the volume savings achievable with machining or molds.
Quote in 24 hours
Parts from 5 working days after confirming the order. The quote specifies the lead time based on geometry, material, finish, and quantity.
How much it costs to manufacture
The price of your part
in PA12.
The price of printing PA12 depends on material volume, geometry, build orientation, and post-processing. Quantity usually reduces the unit cost only slightly.
Check the catalog example to compare materials. To know the cost of your design, request a quote with your 3D file.
Frequently asked questions
Before manufacturing
in PA12.
Properties, applications, and manufacturing: answers to prepare your request.
What is PA12 and what are its properties?
Polyamide for Multi Jet Fusion 3D printing, suitable for functional prototypes and end-use components. It allows complex geometries without dedicated supports. Reference: HP 3D HR PA 12. The 175 °C corresponds to deformation under load (HDT) at 0.45 MPa; at 1.82 MPa it is 95 °C. These are not continuous use temperatures.
What parts can be manufactured in PA12?
You can manufacture functional housings, clips, and ducts, assembly fixtures, and complex geometry parts. Multi Jet Fusion printing allows validating complex shapes without manufacturing a mold. Define the loads, environment, and finish to review the application.
What is the advantage of printing PA12 via Multi Jet Fusion?
MJF allows manufacturing complex geometries in polyamide, with good toughness and without dedicated supports. It is useful for functional prototypes, housings, and ducts. Wall thicknesses, access for powder removal, and part fits must be reviewed.
Does 3D printed PA12 support 175 °C continuous working temperature?
It should not be interpreted that way. The 175 °C of the reference material corresponds to the HDT test with a 0.45 MPa load; at 1.82 MPa the reference is 95 °C. These are deformation under load data, not a continuous use temperature.
Does the price of 3D printed PA12 drop significantly when ordering more parts?
Normally the price per part varies little with quantity. In MJF, material, printing, and post-processing costs remain per unit. To compare a series, request a quote; it is not advisable to transfer savings inherent to machining or molds.
How much does it cost to 3D print a PA12 part?
The price of printing PA12 depends on material volume, geometry, build orientation, and post-processing. Quantity usually reduces the unit cost only slightly. Upload the 3D file to the Proto&Go! platform to receive a quote with cost and lead time.
What tolerances can I request for a PA12 part?
Printing tolerances depend on geometry, orientation, and material. Indicate assembly dimensions on a drawing for the team to confirm feasibility. CNC machining tolerances are not automatically applied.
What file do I need to manufacture a PA12 part?
Upload a 3D model per part, for example in STEP or STL. SLDPRT, X_T, X_B, IPT, CATPART, PRT, SAT, and 3DM files are also accepted. Add a PDF drawing with functional dimensions and assembly requirements.
Compare before choosing
Other options for your part.
Your next part
Shape it
in PA12.
Upload the 3D file. We review feasibility and send you the quote.